Fenix HM65R-T V2.0 Dual Light Sources Headlamp 1600 Lumens

The Fenix HM65R-T V2.0 Rechargeable Headlamp has been upgraded to be the most comfortable hands-free lighting tool on the market. The new SPORT fit headband is larger, has an improved rotary adjustment dial for more precise control, and includes a built-in emergency whistle. Rather than a spotlight and floodlight, the HM65RT V2.0 has one a cool white light and one warm light. Choose warm light for better penetrating performance in foggy conditions. USBC rechargeable with a battery level indicator, this headlamp can run for up to 300 hours continuously on its lowest setting. Great for trail runners, on the job, or just for everyday hands-free lighting needs, the Fenix HM65R-T V2.0 Headlamp is the perfect fit.

Features:

• Fitted with one Luminus SST40 white light LED and one Luminus SST20 warm white light LED, each with a lifespan of 50,000 hours.
• White and warm white light sources cater to various lighting demands.
• Made from quality aluminum, magnesium, and PC for a lightweight yet durable design.
• Powered by a 3400mAh battery, with a maximum runtime of 300 hours.
• Dual top switches for easy and fast operation.
• Single-handed operation with the new two-way SPORT headband fit system.
• Emergency whistle attached to the headband to enhance user safety.
• Battery level indication and inner waterproof USB Type-C charging port.
• IP68-rated protection and 2-meter impact resistance.
• Reverse polarity protection to prevent improper battery insertion.
• Lockout function and widened control covers to avoid accidental activation.

Specifications:

• Max Lumens: 1600
• Max Beam Distance: 558 feet (170 meters)
• Max Runtime: 300 hours
• Lighting Modes: Eight modes including three cool white light levels, four warm white light levels, and SOS
• Bulb Type: One Luminus SST40 white light LED and one Luminus SST20 warm white light LED
• Lens Material: Polycarbonate
• Color Temperature: White light around 6500K, warm white light around 3000K
• Size: 3.15 (80mm) 1.84 (46.8mm) 1.37 (34.9mm)
• Weight: 4.94 oz (140g) including battery and headband
• Battery: One included 3400mAh 18650 rechargeable Li-ion battery or two CR123A batteries
• Included: ARB-L18-3400 battery, spare O-ring, USB Type-C charging cable
• Warranty: 2 years

Operating Instructions:

On/off

Press and hold either of the two switches for 0.5 seconds to turn on/off the lamp.

Mode switching

With the lamp switched off, press and hold either of the two switches for 0.5 seconds to reach the corresponding mode.

White light mode and warm light mode cannot be operated at the same time.

Press and hold either of the two switches for 1.2 seconds to enter the SOS mode.

*In SOS mode, press and hold the white light switch for 1.2 seconds to shiftto the Low output of white light mode.

In SOS mode, press and hold the warm white light switch for 1.2 seconds to shift to the Eco output of warm white light mode.

Output selection

White light mode:with the lamp switched on,single click the white light switch to cycle through LowMedHigh.

Warm white light mode:with the lamp switched on,single click the warm white light switch to cycle through EcoLowMedHigh.

Inwhite light mode,single click the warm white light switch to shift to the Eco output of warm white light mode.

In warm white light mode, single click the white light switch to shift to the Low output of white light mode.

Lockout Function

Lock:With the lamp switched off, simultaneously press and hold the two switches for 3 seconds, the lamp will blink 4 times on the Eco output of warm white light mode to indicate locked status.

Unlock: With the lamp locked, simultaneously press the two switches for 3 seconds, the lamp will be activated with 4 blinks and activates on the Eco output of warm white light mode.

In locked status, clicking or pressing the switches will activate 4 blinks on the Eco output of warm white light mode to indicate locked status.

*When the charging cable is plugged in, the lamp unlocks automatically in switched-off status.

Charging

Adjust the headlamp to reveal the charging port on the back.Uncover the anti-dust cap and plug the USB Type-C side of the charging cable into the charging port of the lamp.With the headlamp switched off, the normal charging time of theFenix ARB-L18-3400 battery is about 3 hours from depleted to fully charged with a 5 V/2 A charging adapter.Only Low output of white light mode and Low output of warm white light mode can be operated while charging.Once charging is completed, be sure to close theanti-dust cover.

*The headlamp can only be charged while using a Fenix ARB-L18 series battery.

*If the headlamp has been fully depleted, it will take about 4 seconds for the battery indicator(s) to function after charging begins.

Battery Level Indication

With the lamp switched off, single click either switch to check the battery status. Single click once again the indicator(s) will go out immediately, or without any operation the indicator(s) will last for 3 seconds.Each time the light is turned on, the indicator(s) will show the battery level and will last for 3 seconds.

• Four lights on: 100% – 80%
• Three lights on: 80% – 60%
• Two lights on: 60% – 40%
• One light on: 40% – 20%
• One light flashes: 20% – 1%

*Note: This only works with a Fenix ARB-L18 Series battery.

Battery Specifications :

*18650 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.Quality Li-ion battery with protective circuit will reduce risks. Fenix ARB-L18 Series battery is recommended.

Battery Replacement

Unscrew the battery cover anticlockwise to insert the battery with the anode side (+) towards the inner side, then screw the battery cover back on.

Intelligent Overheat Protection

The lamp will accumulate a lot of heat when used at high output levels for extended periods. When the lamp reaches a temperature of 60C/140F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60C/140F, the lamp will gradually recall the preset output level.

Low Voltage Warning

When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output, one of the battery level indicators blinks toremind youto timely recharge or replace the battery till the battery runs out.

*Note: This only works with a Fenix ARB-L18 Series battery.

Headband Assembly

Notice: The headband is factory assembled by default.

Rotate the dial clockwise to tighten the headband, and rotate the dial counterclockwise to loosen the headband. When the headband hits its maximum length, keep loosening the headband and the operation direction will reverse.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the lamp and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the lamp will not be used for an extended period, remove the battery, or the lamp could be damaged by electrolyte leakage.
• Turn off and lock the lamp or take out the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
• Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: The lamp is locked.
  Solution: Simultaneously press and hold the two switches for 3 seconds to unlock the lamp.
  B: Poor battery level.
  Solution: Recharge or replace the battery (Ensure battery is inserted according to the manufacturers specifications).
  C: The threads, PCB board contact or other contacts are dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact the distributor.

Warning

• Do NOT place this headlamp in the reach of children!
• Do NOT shine the headlamp directly into the eyes of anyone!
• Do NOT place the headlampnear flammable objects, high temperatures can cause objects to overheat and become flammable/ignite!
• Do NOT use the headlampin inappropriate ways such as holding the unit in your mouth, doing so could cause serious personal injury or death if the headlampor internal battery fails!
• Thisheadlampwill accumulate a significant amount of heat while operating, resulting in a high temperature of theheadlamp shell. Pay close attention to avoid burns.
• Turn off and lock the lampor take out the battery to prevent accidental activation during storage or transportation.
• The LEDs of thisheadlampare not replaceable; so the wholeheadlampwill need to be replaced when any of the LED reach the end of its lifespan.