Campingmoon Backpacking Stove Stand High Type w/ Upper Support Trivet

• This stove stand Z01 can be used for backpacking stove/lantern which has EN417 Lindal Valve.
• There are two types of this backpacking stove stand: High type Z01 and Low type Z02.
• High type stove stand Z01 can use 4oz(110g)/8oz(227g)/16oz(450g) EN417 Lindal valve canister, nozzle type butane canister (need adapter Z11), 1lb/16oz propane tank (need adapter Z22)
• By using this stove stand, camping stove will be much more stable and can hold bigger pot, and it is stable even on rough terrain such as mountain climbing and rocky areas.
• Package include 1pc * Stand Z01; 1pc * storage bag

Features:

BUILT-IN CHECK VALVE

• This stove stand is equipped with a check-valve (self-sealing valve) & O-ring, therefore it wont leak when connect it to gas canister. (Note: Be sure to remove the adapter from the canister after using.)
• The upper support (trivet)of this stove stand is made by stainless steel 304. It is notched, and the cooker that was placed on it during heating is not slippery and easy to stabilize.

RUBBER FEET

• When you use this stove stand on a desk, it will not hurt the desk top.

STORAGE BAG

• All parts of this stove stand can be put into attached canvas case.
• This stove stand weighs only 11oz and has a load capacity of up to 22lb.

Installation Steps

1. Connect centre pole & lower support (legs)get high type legs.
2. Insert the upper support (trivet) into the hole on mounting part to attach it.
3. Connect legs to holes under the mounting part.
4. Confirm that there is no looseness or distortion.